USB to CAN FD Adapter V2
Tools & Accessories

USB to CAN FD Adapter V2

ModelSTM32G431CBT6 + CA-IS2062A

2.5 kV isolated USB to CAN FD adapter, 5 Mbps, supported by cangaroo.

Specifications

MCUSTM32G431CBT6 · 170 MHz · 32 KB RAM · 128 KB Flash
BusCAN FD / CAN 2.0B
Isolation2500 V
Bitrate5 Mbps (data phase)
TransceiverCA-IS2062A (Chipanalog)
Connector3.81 mm 3-pin terminal (WJ15EDGK-3.81-3P)
FirmwareSLCAN (USB CDC) · candleLight 2.5 (gs_usb)

Highlights

  • Two firmware images

    SLCAN for cangaroo and Windows tools; gs_usb for SocketCAN on Linux.

  • Isolated bus

    A 2.5 kV barrier separates USB ground from CAN ground.

The adapter combines an STM32G431CBT6 with a CA-IS2062A isolated transceiver, so the USB side and the CAN side do not share a ground.

Two firmware images are provided: SLCAN over USB CDC, and candleLight 2.5 (gs_usb). SLCAN is used with cangaroo and Windows tools; gs_usb presents the adapter as a SocketCAN interface on Linux.

The bus connector is a 3.81 mm 3-pin pluggable terminal.